EasyManua.ls Logo

RF-KIT RF2K-S - Introduction; Explanation of Symbols; Environment Protection; Transport Package

RF-KIT RF2K-S
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
User manual RF-KIT Power Amplifier RF2K-S
1. Indroduction
1.1 Explanation of symbols
Warnings
Warnings are marked by a warning triangle.
In addition, qualifiers indicate the nature and
severity of the consequences if the measures to
avert the hazard are not followed.
The following qualifiers are used in this document:
NOTE - Risk ofdamage toequipment and property.
WARNING - Risk of serious or even life-threatening personal injury.
DANGER - High risk of serious or life-threatening personal injury.
Important information without danger to people or proper-
ty is marked by the adjacent symbol. These informations are
bounded by lines above and below the text.
1.2 Important informations
Symbol Meaning
Instruction
Reference to a position in the document
Enumeration/List entry
-
Enumeration/List entry
(2
nd
level)
1.3 Environment protection
Disposal of packaging
The packaging protects the device against damage during transport. The
packaging materials are selected according to environmentally friendly
and disposal-related criteria and thus recyclable.
Return of the remaining packaging parts, such as packaging straps, PEbags
etc., into the material cycle saves raw materials and reduces waste.
If you plan to dispose of packaging yourself, pleasedo so at your nearest
recycling centre.
2. Safety informations
Read these operating and installation instructions carefully and com-
pletely before attempting to install and operate the device!
Carefully retain these operating and installation instructions.
Important safety and operating instructions are contained herein.
When selling the device hand this document to the new owner.
There are dangerous voltages inside the device! Before opening the
device:
Switch off the device by pressing the power switch On/Off (1) at the
front of the device and wait until all cooling fans stop.
Disconnect the power cable from the Power jack (9).
Pay close attention to the notes and warnings on the following page
to avoid damage to the device and avoid the risk of serious injury.
Please use this linear amplier only according to the instructions pro
-
voded in this manual.
The device is designed only for operation on frequencies of the ama
-
teur radio service. For legal operation you need a valid amateur radio
license.

Other manuals for RF-KIT RF2K-S