32
User manual RF-KIT Power Amplifier RF2K-S
7. Technical data, characteristics and certifications
7.1 Technical data
• Frequency range: 1.8 - 30 MHz and 50 - 54 MHz
• HF-Out: 1500 W (an 230 V/AC)
800 W (an 110 V/AC)
• Exciter Drive Level: 55 W all bands
• Efficiency: up to 70% (varies by band)
• TX/RX switching: Fast QSK
• Connectors (UHF/PL259): 1x Exciter
4x Antennas
16x external antennas via
external antenna selector
switch
• Dimensions (W x H x D): 19.0 x 31.0 x 42.5 cm
(7.4 x 12.2 x 16.7 inch)
• Supply voltage: 90-290 V AC
• Current consumption: max. 13 A
• FCC-ID: 2AW84RF2K-S
7.2 Characteristics
• Highest spectral purity because of
Dual LDMOS transistors, rated at 3400 W
• Very silent operation due to speed controlled low noise fans
• 7“-Color Touch screen
• Multiple user selectable displays
• -55 dB output for use with pre-distortion systems
• Automatic band switch by frequency measurement
• CAT connectivity via USB
(USB-port is provided by the Raspberry Pi®)
• CAT data via IP (UDP)
• LAN connectivity
• Wi-Fi (client mode)
• Quiet Internal PSU 90-290 V AC
• Power meter (from 1 W up to 2 kW)
• Software update via internet
• Remote Internet operation via PC, tablet or cell phone.
Supports platforms such as Apple IOS, Android, Linux and Windows
• External power/ON by applying +12 V
• BCD Band Data Output for external antenna selector switch
• Integrated automatic antenna tuner
with almost unlimited number of memories, also for the setting
values of up to 16 antennas provided via an external antenna selector
switch
To Next Page
Loading...
