RGBlink M1 User Manual

M1 User Manual
46
4.2 Network Connecting
(1) Setting as right windows as follows:
<Remote IP >and <Local Host IP> setting the same network segment: e.g.192.168.0
<Protocol> select “UDP”
Remote< port>: default “1000”, <Local host port>: default “8082”
(2) Click “Open”, stick the protocol order to left dialog box of “Send”, then click “Send”, Once
“Network Data Receive ”shown the receive data, the remote control is been setting succeed.

RGBlink M1 Specifications

General

Brand	RGBlink
Model	M1
Category	Media Converter
Language	English