Rhymebus RM6F5 series User Manual

Chapter 5 Parameter Setting Description
91
5
±9: Coast to stop command (Fr)
Cut off the control of motor from drive immediately.
Coast to stop command (F_055=9)
Output voltage
Acceleration time
Output frequency
Coast to stop
command (X3)
Start command
±10: Speed tracing from the maximum frequency
Speed tracing from the maximum frequency
(F_053=10)
Terminal start
command (FWD)
Decel. time is 2 sec
Delay Time
before Speed
Tracing(F_089)
The current level of
speed tracing (F_088)
Normal accel. time
> 0.1sec
Speed tracing
command (X1)
Max. output frequency
Output frequency
Output voltage
Output current
The V/F Pattern of
Speed Tracing(F_090)
Return to normal V/F
The current level of
speed tracing

Rhymebus RM6F5 series Specifications

General

Brand	Rhymebus
Model	RM6F5 series
Category	Controller
Language	English