RichAuto A122 - 3.3 Hardware Wiring

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
 3.3
Hardware Wiring
Installation Requirements
the electric field interference.
special testing switching power is needed.
RichAuto motion control system realizes its control through the connection
between the interface board and CNC machine. Interface
into input terminals and output terminals
Input terminals include
J8（
input connecting terminal
J10（
main power connecting terminal
Output terminals include
J2（
X axis pulse signal output terminal
J3（
Y axis pulse signal
J4（
Z axis pulse signal output terminal
J5（
C axis pulse signal output terminal
J7（
output ports control terminal
Input signal terminal
J10 main power
terminal
J8 wiring:
1. Reset terminal:
a)
Mechanical reset switch
b) NPN (normally open
type
are the same as X axis).
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
Hardware Wiring
Installation Requirements
：Power（24V，3A），
it is better to add a filter to prevent
the electric field interference.
If origin detecting switch
are different power supply type,the
special testing switching power is needed.
（
24V origin detecting switch is the best choice
RichAuto motion control system realizes its control through the connection
between the interface board and CNC machine. Interface
board terminal can be divided
into input terminals and output terminals
：
Input terminals include
：
input connecting terminal
）
main power connecting terminal
）
Output terminals include
：
X axis pulse signal output terminal
）
Y axis pulse signal
output terminal）
Z axis pulse signal output terminal
）
C axis pulse signal output terminal
）
output ports control terminal
）
Input signal terminal
terminal
wiring method:
Mechanical reset switch
wiring example (Z, Y direction are the same as X direction)
type
) proximity switch wiring example (
wiring methods of
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
13
it is better to add a filter to prevent
are different power supply type,the
24V origin detecting switch is the best choice
）
RichAuto motion control system realizes its control through the connection
board terminal can be divided
wiring example (Z, Y direction are the same as X direction)
wiring methods of
Y and Z