RichAuto A122 - 5. Machine Operation; 5.1 Return home; 5.3 Manual processing Operation

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
numbers，and press “
After cracking p
assword, restart the
4.2.5 Version View
Users can view information
Update Version e.g.：
Product ID e.g.：
A0020099
Soft Version e.g.：A1.
2866

Emergency Version eg
Soft type：
Lathe Carving
Hardware type：
Support 3

Machine Operation

5.1 Return home
It will display “
all axis home
starting up. Select one
as needed
system.
In some cases, such as reboot and continue the last time operation after normal power off,
the system no need to return machine home, just c
because system had already saved the coordinates values when system normally
powered off.
 5.2
Import processing files
Before processing, generally we should import files. RichAuto system has 2 ways for
processing: U disk
file processing and inner file processing.
1. Directly import the processin
2. Copy the process file to inner memory space via U disk
 5.3
Manual processing Operation
Manual Processing O
peration refers to controlling of the machine tool through the
keyboard 3-
axis direction buttons. User can change the manual speed and set the grid
under manual processing operation. System will enter manual operation state after
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
”to confirm.
assword, restart the
dsp controller, and then it
can work normally.
Users can view information
both hardware and software
about the system
d5-68
A0020099
2866
Emergency Version eg
：A1.2268
Lathe Carving
Support 3
-
inch screen, Lathe, 2 spindle lathe, flash disk mode
Machine Operation
5.1 Return home
all axis home
”, “Z home only”, “none axis home” when
the dsp handle is
as needed
. Machine return home can correct the coordinate of
In some cases, such as reboot and continue the last time operation after normal power off,
the system no need to return machine home, just c
hoose “none axis home”. That is
because system had already saved the coordinates values when system normally
Import processing files
Before processing, generally we should import files. RichAuto system has 2 ways for
file processing and inner file processing.
1. Directly import the processin
g file into U disk, and then run the controller
2. Copy the process file to inner memory space via U disk
or U Flash Disk Mode
Manual processing Operation
peration refers to controlling of the machine tool through the
axis direction buttons. User can change the manual speed and set the grid
under manual processing operation. System will enter manual operation state after
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
35
can work normally.
about the system
, including：
inch screen, Lathe, 2 spindle lathe, flash disk mode
the dsp handle is
. Machine return home can correct the coordinate of
the
In some cases, such as reboot and continue the last time operation after normal power off,
hoose “none axis home”. That is
because system had already saved the coordinates values when system normally
Before processing, generally we should import files. RichAuto system has 2 ways for
g file into U disk, and then run the controller
.
or U Flash Disk Mode
.
peration refers to controlling of the machine tool through the
axis direction buttons. User can change the manual speed and set the grid
under manual processing operation. System will enter manual operation state after