RichAuto A122 - 5.5 During processing operations

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
Press “ ” and “
press “
” to set the value (next value setting is the same), then p
save. The system checks
the processing code and start to process when
finished.
The system code checking is a
and start running file immediately.
System can
remember the check
time.
During the processing, the screen scrolling display real
time、
current g code line number.
button, and it will stop rolling, press
 5.5
During processing operations
5.5.1
Speed ratio Adjustment
In process of processing,
press “
every single push “
the displayed speed changes according to the speed ratio, but displayed time will not
change.
current speed= work speed * speed ratio
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
”to move cursor
and select the item which needs to modify
” to set the value (next value setting is the same), then p
r
ess “
the processing code and start to process when
The system code checking is a
uto mode, user can press “
” to skip the checking
and start running file immediately.
remember the check
ed files and will not recheck
the same code again next
During the processing, the screen scrolling display real
-
time processing speed,
current g code line number.
If user only need one of them could press
button, and it will stop rolling, press
again to switch to the next option.
During processing operations
Speed ratio Adjustment
press “
”and“
”can change speed ratio directly,
” or “
”, the speed ratio will go up or down by 0.1,
the displayed speed changes according to the speed ratio, but displayed time will not
current speed= work speed * speed ratio
Set Work Param
WorkSpd 1200.000
FastSpd 1200.000
LastSpd 3000.00
RoughLen 0.00000
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
41
and select the item which needs to modify
,
ess “
” to
the processing code and start to process when
the checking is
” to skip the checking
the same code again next
time processing speed,
operation
If user only need one of them could press
again to switch to the next option.
”can change speed ratio directly,
”, the speed ratio will go up or down by 0.1,
the displayed speed changes according to the speed ratio, but displayed time will not