RichAuto A122 - System Setup

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
4.2.3 System Setup
System Setup
1. Languages
Change system display language
2. Param Initialization
：
After data initial system parameters will restore to factory setting.
3. Inner format
To empty the internal file storage area data, it will not affect the system parameters.
4. Clean system cache
Users need to do this in certain
upgrade (
such as change four
operation)
. After this operation,
5. Trial password
If CNC machine manufacturers had set some kinds of passwords before shipment
(including trial password, backup password, etc.),
and tell us the 20 original digits
system to remov
e the old one
System Setup
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
System Setup
structure diagram
Change system display language
，
users can choose Chinese or English.
：
After data initial system parameters will restore to factory setting.
To empty the internal file storage area data, it will not affect the system parameters.
Users need to do this in certain
operations.
Such as break point recovery or
such as change four
-axis program to three-axis
program, users must do this
. After this operation,
users need to restart the system.
If CNC machine manufacturers had set some kinds of passwords before shipment
(including trial password, backup password, etc.),
but forgot them, pls
contact RichAuto
and tell us the 20 original digits
. RichAuto will provide new 20-digit,
pls input them into the
e the old one
.
System Setup
Languages
Param Initialization
Inner Format
Clean System Cache
Trial Password
Key Test
Backup Data
Restore Data
System Update
Menu Password
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
24
users can choose Chinese or English.
To empty the internal file storage area data, it will not affect the system parameters.
Such as break point recovery or
functional
program, users must do this
If CNC machine manufacturers had set some kinds of passwords before shipment
contact RichAuto
pls input them into the