RichAuto A122 - Page 2

Thank you for choosing
Rich
This manual helps you be
familiar with the company's products, an
configuration, etc.
The
manual introduces the detailed knowledge of the system characteristics
commissioning, and safety precautions.
will help you make use it better.
Precautions：
1.
Use of this product is strictly prohibited in the strong interference
ambient temperature 0-70 ℃
, working environment humidity 0
2.
Insert U disk in the correct direction. Do not pull out
3.
Perform processing U disk file process, do not pull out the U disk to prevent the interru
4.
Strictly prohibited metal, dust, and other conductive substances enter the controller.
5.
The machine shell should connect the ground wire to ensure the safety of working and to prevent interference.
6. Prohibited unauthorized disasse
mbly, no internal user repairable parts.
7.
For long periods of time not using, please cut off the power, and properly kept.
8. Pay attention to water, dust
and fire
9.
Do not use the corrosive chemical solvents to clean the device.
10. Spindle motor bea
ring life and its
11.
Graver is very sharp. Do not touch when it is running, in order to avoid injury; Do not use handkerchiefs, scarves
contact it to prevent embroiled damage.
Important Notice：
The Company shall not be
responsible for any loss caused by improper using or breaking the correct operating
procedures.
Beijing RichAuto S&T Co., Ltd owns this manual final interpretation, the company reserves the right to modify all
information in this manual, including data, te
Beijing RichAuto S&T Co., Ltd
Rich
Auto products!
familiar with the company's products, an
d get information about system
manual introduces the detailed knowledge of the system characteristics
、
operational processes
commissioning, and safety precautions.
Ple
ase read this manual carefully before using the system and machine, which
Use of this product is strictly prohibited in the strong interference
、
strong magnetic field environment. Operating
, working environment humidity 0
-90% (non-condensing).
Insert U disk in the correct direction. Do not pull out
50
pins tenon type socket cable when system run.
Perform processing U disk file process, do not pull out the U disk to prevent the interru
ption of data transmission.
Strictly prohibited metal, dust, and other conductive substances enter the controller.
The machine shell should connect the ground wire to ensure the safety of working and to prevent interference.
mbly, no internal user repairable parts.
For long periods of time not using, please cut off the power, and properly kept.
and fire
when using it.
Do not use the corrosive chemical solvents to clean the device.
ring life and its
rotate speed is inversely proportional.
Graver is very sharp. Do not touch when it is running, in order to avoid injury; Do not use handkerchiefs, scarves
contact it to prevent embroiled damage.
responsible for any loss caused by improper using or breaking the correct operating
Beijing RichAuto S&T Co., Ltd owns this manual final interpretation, the company reserves the right to modify all
information in this manual, including data, te
chnical details, etc..
Beijing RichAuto S&T Co., Ltd
RichAuto |
d get information about system
components、
operational processes
、installation &
ase read this manual carefully before using the system and machine, which
strong magnetic field environment. Operating
pins tenon type socket cable when system run.
ption of data transmission.
The machine shell should connect the ground wire to ensure the safety of working and to prevent interference.
Graver is very sharp. Do not touch when it is running, in order to avoid injury; Do not use handkerchiefs, scarves
responsible for any loss caused by improper using or breaking the correct operating
Beijing RichAuto S&T Co., Ltd owns this manual final interpretation, the company reserves the right to modify all