RichAuto A122 - Page 55

Add: 5F
, No.4 building, No 4. Yard, life Rd, life science park,
Tel：010-53275118 Fax
：
After these operation the screen of A122 displays as shown in the picture
to confirm.
2) Axis mark
The carving knife
installation position
at the top of the machine, become
A132’s.
Another difference is the moving direction of the forth axis of A122, moving down
towards is negative.
Beijing RichAuto S&T Co., Ltd
, No.4 building, No 4. Yard, life Rd, life science park,
Beiqing St., Changping d
ist.
：
010-53275110/53275111 Web site：
www.richnc.com.cn
After these operation the screen of A122 displays as shown in the picture
below.
installation position
of lathe machine which adapted
with A122 system is
at the top of the machine, become
s the forth axis. T
he others marks are
Another difference is the moving direction of the forth axis of A122, moving down
WZ 0.000 MAUN
WY 0.000 F 8
WA 0.000 L SP
XY Clear?
Beijing RichAuto S&T Co., Ltd
ist.
Beijing, China
www.richnc.com.cn
51
below.
Press OK
with A122 system is
he others marks are
the same as
Another difference is the moving direction of the forth axis of A122, moving down