Ricoh 2045e - Page 101

Delivering Scan File
91
7
r When [Return Receipt] is se-
lected, an e-mail notifying
that the file has been read by
the destination party is sent
to the sender selected here.
To use [Return Receipt], it is
necessary to make settings
such as the e-mail address in
advance in ScanRouter V2
Professional.
C Press [OK].
Using a registration number to
specify a sender name
A Press [Attach Sender's Name].
B Use the number keys to enter
the five-digit registration
number that has been assigned
to a sender.
Example: To enter 00007
Press the {7} key, and then
press the {#} key.
Note
r When using ScanRouter V2
Professional, [Return Receipt]
is displayed when a sender is
selected.
r When [Return Receipt] is se-
lected, an e-mail notifying
that the file has been read by
the destination party is sent
to the sender selected here.
To use [Return Receipt], it is
necessary to make settings
such as the e-mail address in
advance in ScanRouter V2
Professional.
C Press [OK].
Searching to select a sender
A Press [Attach Sender's Name].
B Press [].