Ricoh 2045e - Page 73

Sending Scan File by Scan to Folder
63
5
Using a registration number to
select a destination folder
A Press [Registration No.].
B Use the number keys to enter
the five-digit registration
number that has been assigned
to a destination folder.
If the entered number is less
than five digits long, press the
{#} key after the last number.
Example: To enter 00003
Press the {3} key, and then
press the {#} key.
Note
r If a protection code has been
set for the folder, a screen for
entering the protection code
appears.
C To select more destination
folders, repeat step B.
Note
r To deselect a destination,
press [U Prev.] or [T Next] to
display the destination in the
destination field, and then
press the {Clear/Stop} key.
Manual entry of a path for the
destination folder of the client
computers on the same network
A Press [Enter Destination].
B Press [SMB].
C Press [Manual Input] on the right
side of the path field.
The soft keyboard is displayed
for entering the path for the
folder.
D Enter the path for the folder.
Note
r This is an example of enter-
ing a pass to send to the fold-
er “user” of the computer
“desk01”. \\desk01\user
r An IP address can be also en-
tered if you use the following
operating systems are availa-
ble: Windows 98/Me, Win-
dows XP, Windows 2000,
Windows NT 4.0.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
E Press [OK].
F If entering a user name to log
on is required, press [Manual In-
put] on the right side of the user
name field.
The soft keyboard is displayed
for entering the user name field.
G Enter the user name.
H Press [OK].