Sending Scan File by Scan to Folder
67
5
Searching to select a destination
folder from the Destination List
A Press [].
B Press [Search by Dest. Name].
The soft keyboard is displayed
for entering a user name.
C Enter part of the destination
folder name.
Note
r Enter the first character or
characters of the destination
name.
r It is necessary to differentiate
between capital and small
letters.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
D Press [OK].
E Select a destination folder.
F Press [Exit].
Checking selected destinations
A Use the destination field at the
top of the screen to check
which destinations are select-
ed.
Note
r When multiple destinations
are selected, the selected des-
tinations are displayed in the
order they were selected by
pressing [U Prev.] or [T Next].
r Pressing the {Check Modes}
key on the control panel lets
you check the list of selected
destinations.
G Select the file type if necessary.
A Press [File Type].
B Select the file type of the file to
be sent from the displayed
types.
C Press [OK].
H Specify the file name of the file to
be sent if necessary.
A Press [File Type].
B Press [File Name].
The soft keyboard is displayed
for entering a file name.
C Enter a file name.
To Next Page
