User Tools Menu
This section describes the User Tools in Copier Features.
Default settings are shown in bold type.
Auto Tray Switching
If you load paper of the same size and in the same orientation in two trays, the machine automatically
shifts to the other when the first tray runs out of paper (when “On” is selected). This function is called
“Auto Tray Switching”. This setting specifies whether to use Auto Tray Switching or not.
The default setting is On.
• Off
When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is
displayed.
Original Type Setting
You can adjust copy finish quality level according to original type. You can choose these functions
after selecting Original Type 1 (Text) or Original Type 2 (Photo).
• Text Mode 1
normal text originals
• Text Mode 2
newspapers, semi-transparent originals (reverse side print faintly visible)
• Photo Mode 1
text / photo images containing mostly photo areas
• Photo Mode 2
text / photo images containing mostly text areas
• Photo Mode 3
actual photographic paper
• Special Mode 1
highly transparent originals (reverse side clearly visible), or light text on a colored background.
Also for originals with very grainy backgrounds (some newspapers) and light text.
• Special Mode 2
originals with colored text and lines
• Special Mode 3
photo images created by dithering (visible dots), such as newspaper photos - normal resolution
• Special Mode 4
photo images created by dithering (visible dots), such as newspaper photos - coarse resolution
User Tools Menu
63
To Next Page
Loading...
