PAPER TRAY UNIT INSTALLATION 10 August, 2001
3-12
3. Remove the connector cover [A] (1 screw).
4. Connect the cable [B] to the copier, as shown.
5. Attach a securing bracket [C] to each side of the paper tray unit, as shown (1
screw each).
6. Re-install the connector cover.
7. Remove the 2nd paper tray [D] and secure the paper tray unit with two screws
[E].
B390I604.WMF
B390I600.WMF
[A]
[B]
[C]
[C]
[E]
[D]
To Next Page
Loading...
