10 August, 2001 PLATEN COVER INSTALLATION
3-43
3.14.1 MEMORY (G578/G579)
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
1. Remove the connector cover [A] and rear cover [B] (4 screws).
2. Remove the shield cover [C] (7 screws).
3. Install the memory DIMM [D] on the controller board.
4. Replace the controller board cover and rear cover.
B453I101.WMF
B453I109.WMF
B453I503.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
