Ricoh Aficio 1027 - Relay Clutches

PAPER FEED 10 August, 2001
6-28
6.6.6 RELAY CLUTCHES
1. Remove the optional duplex unit and/or by-pass tray unit if they have been
installed.
2. Remove the rear cover and lower rear cover. (☛ 6.6.3)
3. Remove the lower right cover [A] (2 screws).
4. Remove the scanner right cover. (☛ 6.1.2)
5. Remove the right cover [B] (4 screws).
6. Swing down the I/O board bracket. (☛ 6.6.5)
7. Remove the connector bracket [C] (2 screws).
8. Replace the upper relay clutch [D] (1 connector).
9. Remove the right back cover [E] (1 screw).
10. Replace the lower relay clutch [F] (1 connector).
B027R717.WMF
B027R714.WMF
B027R716.WMF
[A]
[B]
[C]
[D]
[E]
[F]