Ricoh Aficio 1027 - SP7-XXX: Data Log

10 August, 2001 SERVICE PROGRAM MODE
4-43
Service
Tables
6
Mode Number/Name Function/[Setting]
ADF APS Data Display901
Displays the status of the original size sensors in the
ADF. (☛ 4.2.10)
ADF Shading Interval Time910*
Adjusts the interval for shading processing in DF
mode.
Light and heat may affect the scanner response. If
copy quality indicates that white level is drifting during
a DF copy job, reduce this setting.
[0 ~ 120 / 20s / 1s/step]
ADF Loop Back Test
1DF GATE
DFU
0 = Gate, 1 = Asart
2 DF TXD Break
DFU
0 = Off, 1 = On
3 Serial Communication
DFU
0 = NG, 1 = OK
4Original Set
DFU
0 = Off, 1 = On
920
5 Serial Check
DFU
Finisher/Duplex loop Back Test
1 Loop Back Test
DFU
925
2 Result
DFU
SP7-XXX: Data Log
7
Mode Number/Name Function/[Setting]
Main Motor Operation Time001*
The number of prints and drive time for drum
revolutions can be obtained by counting the main
motor revolution time. If the amount of the time
required for the drum to revolve to print 1 copy
increases, this data combined with the number of
copies can be used to analyze problems and could be
useful for future product development.
Display: 00000000~99999999 min.
Total Original Counter
1 All Modes
2 Copier
3Fax
4 Document Box
5 Scanner
002*
6 Others
Select a number to display the total original count
(number of originals fed) for the selected item.
Total Print Counter
1 All Modes
2 Copier
003*
3Fax
Select a number to display the total print count for the
selected item.