10 August, 2001 SYSTEM SETTINGS AND COPY SETTING RESET
4-73
Service
Tables
4.5.2 COPIER SETTING RESET
The copy settings in the UP mode can be reset to their defaults. Use the following
procedure.
1. Press User Tools/Counter .
2. Hold down " and then press Copier/Document Server Settings.
NOTE: You must press " first.
3. When the message prompts you to confirm that you want to reset the Copier
Document Server settings, press Yes.
4. When the message tells you that the settings have been reset, press Exit.
B027S504.WMF
To Next Page
Loading...
