10 August, 2001 LCT INSTALLATION
3-15
3. Remove the connector cover [A] (1 screw).
4. Connect the cable [B] to the copier, as shown.
5. Attach a securing bracket [C] to each side of the LCT, as shown (1 screw
each).
6. Re-install the connector cover.
7. Remove the 2nd paper tray and secure the LCT with two screws [D].
B391I504.WMF
B391I501.WMF
[A]
[B]
[C]
[C]
[D]
To Next Page
Loading...
