TRAY HEATER 10 August, 2001
3-50
5. Remove the 2nd paper lift motor [A] (2 screws, 1 connector).
6. Route the heater cable [B] to the side of rivet [C] and under bracket [D].
7. Clamp the heater cable [B] as shown.
8. Joint the heater cable and the ac cable [E].
9. Reinstall the paper lift motor [A] and reassemble the machine.
B027I513.WMF
B027I501.WMF
[A]
[B]
[E]
[B]
[C]
[D]
To Next Page
Loading...
