SERVICE PROGRAM MODE 10 August, 2001
4-30
4
Mode Number/Name Function/[Setting]
Background Erase
6 Text This adjustment is only effective for the “Custom
Setting” original type.
A larger number reduces dirty background. If “0” is
selected, background erase is disabled.
[0 ~ 255 / 0 / 1 step]
7 Photo
[0 ~ 255 / 0 / 1 step]
8 Text/Photo
[0 ~ 255 / 0 / 1 step]
9Pale
[0 ~ 255 / 0 / 1 step]
10 Generation
[0 ~ 255 / 0 / 1 step]
Gamma Selection
11 Text
This adjustment is only effective for the “Custom
Setting” original type.
Selects the gamma table for each original type.
[0 ~ 2 / 0 / 1/step]
0: Standard gamma table
1: This gamma table reduces the background of the
original and gives sharp characters.
2: The gamma table increases the number of
gradations in high-density areas.
12 Photo
[0 ~ 2 / 0 / 1/step]
13 Text/Photo
[0 ~ 2 / 0 / 1/step]
14 Pale
[0 ~ 2 / 0 / 1/step]
904*
15 Generation
[0 ~ 2 / 0 / 1/step]
Image Data Path905*
Selects one of the following video data outputs which
will be used for printing. DFU
[0 ~ 3 / 0 / 1 step]
0: Normal
1: After black level correction
2: After shading correction without black level
correction
3: Shading data
1
Fax 25%, 50%
Reduction
Determines whether 25% and 50% reduction is
available in fax mode.
[0 = No, 1 = Yes]
907*
2 Outline Level
Japanese version only DFU
IPU Image Data Path909*
Selects one of the following image data outputs, which
will be used for printing. DFU
[0 ~ 255 / 0 / 1 step]
Bit 7: Shading
Bit 6: Scanner gamma
Bit 5: Pre-filtering
Bit 4: Magnification
Bit 3: Scanner/Printer Mask
Bit 2: Gradation
Bit 1: Filtering
Bit 0: Printer gamma
To Next Page
Loading...
