SERVICE PROGRAM MODE 10 August, 2001
4-56
Reading
Number Bit Description
01
7 Dip Switch - 4 On Off
6 Dip Switch - 3 Off On
5 Dip Switch - 2 Off On
4 Dip Switch - 1 Off On
3 Not Used
2 Front Safety Sw – 5V On Off
1 Front Safety Sw – 24V Off On
8
0 Main Motor Ready Signal Ready Not ready
7 Not used
6 Relay Off Signal Not detected Detected
5 Toner Bottle Motor Lock Locked Not locked
4 Right Cover Open Closed Open
3 Registration Sensor Activated Deactivated
2 Exhaust Fan Lock Not locked Locked
1 Interchange Cover Open Closed Open
9
0 Paper Overflow Sensor Activated Deactivated
7 Not Used
8 Not Used
5 Not Used
4 Upper Relay Sensor Activated Deactivated
3 1st Paper End Paper End Paper is present
2 2nd Paper Lift Sensor Activated Deactivated
1 1st Paper Lift Sensor Activated Deactivated
10
0 Not Used
7 2nd Paper Size 1 Activated Deactivated
6 2nd Paper Size 2 Activated Deactivated
5 2nd Paper Size 3 Activated Deactivated
4 2nd Paper Size 4 Activated Deactivated
3 1st Paper Size 1 Activated Deactivated
2 1st Paper Size 2 Activated Deactivated
1 1st Paper Size 3 Activated Deactivated
11
0 1st Paper Size 4 Activated Deactivated
NOTE: Numbers 12 to 14 are not used for this machine.
To Next Page
Loading...
