Specifications
66
6
• Inch version (Engineering):
Full-size: 100%
Reduce: 25.0%, 32.4%, 50.0%, 64.7%
Enlarge: 129.4%, 200.0%, 258.8%, 400.0%
Zoom: 25.0-200.0% (0.1% increments)
Zoom: 200.0-400.0% (0.2% increments)
• Inch version (Architecture):
Full-size: 100%
Reduce: 25.0%, 33.3%, 50.0%, 66.7%
Enlarge: 133.3%, 200.0%, 266.7%, 400.0%
Zoom: 25.0-200.0% (0.1% increments)
Zoom: 200.0-400.0% (0.2% increments)
❖
❖❖
❖ Copying speed (full-size copying):
2 copies/minute (A0K), 4 copies/minute (A1L), 3.6 mm/minute (60
mm/second)
❖
❖❖
❖ Original:
Sheet
❖
❖❖
❖ Warm-up time:
Less than 2 minutes (23°C)
❖
❖❖
❖ First copy time:
• Metric version:
When upper tray is selected: 22 seconds (A1L, paper roll tray), 34 seconds
(A1L, bypass tray)
• Inch version:
When upper tray is selected: 22 seconds (DL, paper roll tray), 34 seconds
(DL, bypass tray)
❖
❖❖
❖ Maximum original size:
914 × 3600 mm, 36" × 141.7"
❖
❖❖
❖ Non-reproduction area:
• Metric version:
• Top: 8 mm
• Bottom: 8 mm
• Left and Right 2 ± 2 mm (less than 5 mm on either side)
• Inch version:
• Top: 0.32"
• Bottom: 0.32"
• Left and Right 0.08" ± 0.08" (less than 0.20" on either side)
NeptuneC1_GBzen_F_FM_pre.book Page 66 Tuesday, December 16, 2003 5:03 PM
To Next Page
Loading...
