Ricoh Aficio BP20 - Windows 98;Me

Page 2-10 Administratior Guide
Print Driver Installation for Networked Printers
Windows 98/Me
¾ Refer to "Installing Software for Network Printing" on page 2-24 of User’s Guide to install
and setup the printer drivers on the workstation. Once the drivers are installed, connect a
driver to the printer on the network by selecting [ Multi Direct Print Type S] for the network
port.
1. Select [Start], select [Settings], and then select [Printers]. Right-click on the installed
Printer icon and select [Properties].
2. Select [Detaisl] tab, and Click [Add Port]. The [Add Port] screen will be displayed.
3. Select [Other] Radio button. Select [Multi Direct Print Type S], and then click [OK].
4. Search a printer using the following radio button options and click[Next].
-IP Address
-IPX/SPX Address
-DNS Name
-Auto detection on the network
5. If you select " Auto detection on the network" in the step 4, printers on the network are listed up.
Select a printer in the list and click
[Next] button. Other options in the step 4 skip this step.
6. Enter port name and click [Finish] button.
¾ Continue with Test Print on page 2-16.
1
2