Ricoh Aficio BP20 - Printing to the Rear Output Tray (Face Up)

U SING P RINT M ATERIALS
3.6
Printing to the Rear Output Tray (Face up)
The printer always prints to the rear output tray if it is open.
Paper comes out of the printer face-up, and each time a sheet
of paper comes out, it falls down from the printer.
Printing from the Multi-Purpose Tray to the rear output tray
provides a
straight paper path . Opening the rear output tray
might improve the output quality with the following:
• envelopes
• labels
• transparencies
To open the rear output tray:
1 Open the rear door by pulling it down. The cover functions
as the output tray.
C AUTION : The fusing area at the rear portion of the inside of
your printer is hot when powered. Be careful not to be burned
when accessing this area.