Administratior Guide Page 3-3
Network Installation Using Internet Services
Using Web Aficio BP20N
Introduction
Web Aficio BP20N uses the embedded HTTP Server on the Aficio BP20N to allow
communication with the Aficio BP20N if you have a Web Browser with access to the Internet
or Intranet. By entering the IP Address of the Aficio BP20N as the URL (Universal Resource
Locator) in the Browser, direct access to the Aficio BP20N is available.
NOTE: Microsoft Internet Explorer version 4.x or later should be used. Other
browsers may work, but could produce unexpected results.
Many of the selections and settings needed to install Aficio BP20N on a network can be made
using Internet Services.
Many of the features available within Internet Services will require an admin user name and
password. A user will only be prompted for an admin name and password once in a single
browser session.
Before the Internet Services feature can be used for installing Aficio BP20N on a network it
must be enabled. There are two stages required to enable Internet Services:
¾ Network Communication Setup
This requires the Aficio BP20N to be set up for Internet Services.
¾ Enable Internet Services
¾ Make settings to the appropriate network
NOTE: When making more than one configuration change please complete all the
changes in one go and then carry out a reboot.
To Next Page
Loading...
