Ricoh Aficio BP20 - Reinstalling Printer Software

2.30
S ETTING U P Y OUR P RINTER
Reinstalling Printer Software
You can reinstall the software if installation fails.
1 Start Windows.
2 From the Start menu select Programs or All Programs Æ
Aficio BP20 Series Æ Maintenance .
3 Select Repair and click Next .
N OTES : If your printer is not already connected to the computer, the
following window will appear.
• After connecting the printer, click Next .
• If you don’t want to connect the printer at this time, click Next ,
and
No on the following screen. Then the installation will start
and a test page will not be printed at the end of the installation.
4 Select the components you want to reinstall and click Next .
If you select Printer , the window asking you to print a test page
appears. Do as follows:
a. To print a test page, select the check box and click
Next .
b. If the test page prints out correctly, click Yes .
If it doesn’t, click
No to reprint it.
5 When the reinstallation is done, click Finish .