Administratior Guide Page 2-15
Print Driver Installation for Networked Printers
You can move printer or group to another group using drag-and- drop operations. If you press
and hold “Ctrl” key while dropping, object will be not moved but copied.
To add a printer to a group, you should select this group and press [New Printer …] button.
This also can be done from pop-up menu. Some dialog will appear:
In New Printer Properties dialog, you should specify:
¾ The name for new printer (it will be used in “groups ” tree));
¾ Printer URL;
¾ Authentication parameters (if needed).
Patterns allow you to fill these parameters automatically. The patterns are taken from Multi
Direct Print Type S IPP ports configurations. For instance, if you have an Multi Direct Print
Type S IPP port, which is configured for a single printer, you can create a printer in [groups]
tree with the same parameters (including the authentication name and the password).
To delete a printer or a group, press [Delete] button or select [Delete] in pop--up menu.
To change printer properties, press [Properties …] button or select [Properties] in pop--up
menu.
To Next Page
Loading...
