U
SING
P
RINT
M
ATERIALS
3.22
3
Adjust the guide to fit the width of the material stack.
4
When you print, select the appropriate paper source, type,
and size in the software application. For details, see
page 4.6.
N
OTES
:
• If the size of your print material is not listed in the
Size
box in
the
Paper
tab of the printer driver properties, click the
Custom
button and set the size manually. See
page 4.6
.
• When you use
76 by 127 mm
(3 by 5 in.) paper and it is too thin,
a paper jam may occur. Use card stock heavier than 105g/m
2
5
After printing, close the Multi-Purpose Tray and the rear
output tray.
To Next Page
Loading...
