Parameter Setting
97
4
D Select [Parameter Setting] using {U} or {T}, and then press the {OK} key.
E Select the switch number you want to change using the scroll keys, and
then press the {OK} key.
F Select the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat step
F
to change another bit number for the same switch.
G Press the {OK} key.
H Repeat steps
E
and
F
to change the switch settings.
I After all the settings are finished, press the {User Tools/Counter} key.
Reference
p.98 “Printing the Parameter Settings List”
To Next Page
Loading...
Need help?
General
