Registering Addresses and Users for Facsimile/Scanner Functions
198
7
O Press the {User Tools/Counter} key.
Note
❒ To change the name, see "Changing a Registered Name".
Reference
p.193 “Locating the SMB folder manually”
p.194 “Locating the SMB folder using Browse Network”
p.140 “Changing a Registered Name”
"Entering Text", About This Machine
Changing the protocol
A Select [FTP] or [NCP] using {U} or {T}, and then press the {OK} key.
B A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous protocol.
C Enter each item again.
Reference
p.201 “Registering an FTP Folder”
p.213 “Registering an NCP folder”
To Next Page
Loading...
Need help?
General
