Registering Addresses and Users for Facsimile/Scanner Functions
206
7
Z Press the {User Tools/Counter} key.
Note
❒ For registration of a name, see "Registering Names".
❒ You can enter up to 128 characters for the user name.
❒ You can enter up to 64 characters for the password.
❒ You can enter a server name using up to 64 characters.
❒ You can enter an absolute path, using this format: "/user/ home/user-
name"; or a relative path, using this format: directory/sub-directory".
❒ If you leave the path blank, the login directory is assumed to be the current
working directory.
❒ You can also enter an IPv4 address.
❒ You can enter a path using up to 128 characters.
❒ You can enter 1 to 65535.
❒ If the connection test fails, check the settings, and then try again.
❒ When [Do not Specify] is selected in step
J
, the FTP User Name and FTP
Password that you have specified in Default User Name / Password
(Send) of File Transfer settings applies. For details, see "File Transfer".
❒ If User Authentication is specified, contact your administrator.
Reference
p.138 “Registering Names”
p.193 “Locating the SMB folder manually”
p.194 “Locating the SMB folder using Browse Network”
"Entering Text", About This Machine
Changing the FTP registered folder
A Select [System Settings] using {U} or {T}, and then press the {OK} key.
B Select [Administrator Tools] using {U} or {T}, and then press the {OK} key.
To Next Page
Loading...
Need help?
General
