Registering Addresses and Users for Facsimile/Scanner Functions
208
7
I Select [FTP] using {U} or {T}, and then press the {OK} key.
J To change the server name, enter the new server name, and then press the
{OK} key.
Otherwise, just press the {OK} key.
K To change the port number, enter the new port number, and then press the
{OK} key.
Otherwise, just press the {OK} key.
L If you want to change the path, enter the new path, and then press the {OK} key.
Otherwise, just press the {OK} key.
M Press [Com.Test] to check the path is set correctly.
N When you have finished making changes, press [End].
To Next Page
Loading...
Need help?
General
