Registering Folders
219
7
Locating the NCP folder using Browse Network
A Select [Browse Network] using {U} or {T}, and then press the {OK} key.
B If you have set "Connection Type" to [NDS], a list of items in the NDS tree
appears. If you have set "Connection Type" to [Bindery], a list of items on the
NetWare server appears.
C Search for the destination folder in the NDS tree or NetWare server, and
then press [Apply].
You can press [Up] to switch between levels.
Note
❒ Only the folders you are allowed to access appear in [Browse Network].
❒ If the languages used on the machine and the destination you want to view
differ, the items in the list may not appear correctly.
❒ Up to 100 items can be displayed in the list.
To Next Page
Loading...
