Registering Addresses and Users for Facsimile/Scanner Functions
218
7
Locating the NCP folder manually
A Select [Manual Entry] using {U} or {T}, and then press the {OK} key.
B Enter the path name, and then press the {OK} key.
C Press [Com.Test] to check the path is set correctly.
D Press [Exit].
Note
❒ If you set "Connection Type" to [NDS], and if the NDS tree name is "tree",
the name of the context including the volume is "context", the volume
name is "volume" and the folder name is "folder", then the path will be
"\\tree\volume. context\folder".
❒ If you set "Connection Type" to [Bindery], and if the NetWare server name
is "server", the volume name is "volume" and the folder name is "folder",
then the path will be "\\server\volume\folder".
❒ You can enter a path using up to 128 characters.
❒ If the connection test fails, check the settings, and then try again.
To Next Page
Loading...
Need help?
General
