Registering Folders
217
7
W Press [End].
X Press the {OK} key.
Y Press the {User Tools/Counter} key.
Note
❒ To register the name, see Registering Names".
❒ You can enter up to 64 characters for the user name.
❒ If you select [NDS] for the connection type, after the user name, enter the
context name where the user object resides. If the user name is "user" and
the context name is "context", the user name you would enter is "user.con-
text".
❒ You can enter up to 64 characters for the password.
❒ To specify a folder, you can either enter the path manually or locate the
folder by browsing the network.
❒ When [Do not Specify] is selected, the NCP User Name and NCP Password
that you have specified in Default User Name / Password (Send) of File
Transfer settings applies.
❒ If User Authentication is specified, contact your administrator.
Reference
p.138 “Registering Names”
p.218 “Locating the NCP folder manually”
p.219 “Locating the NCP folder using Browse Network”
"Entering Text", About This Machine
To Next Page
Loading...
Need help?
General
