Connecting the Machine
22
1
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒ When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒ When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.45 “Interface Settings”
p.51 “File Transfer”
Interface Settings/Network Host Name As required
Interface Setting/
IEEE 802.11b
Communication Mode Necessary
Interface Setting/
IEEE 802.11b
SSID Setting As required
Interface Setting/
IEEE 802.11b
Channel As required
Interface Setting/
IEEE 802.11b
Security Type As required
Interface Setting/
IEEE 802.11b
Communication Speed As required
File Transfer SMTP Server Necessary
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3/IMAP4 Settings As required
File Transfer Admin. E-mail Address As required
File Transfer E-mail Communication Port As required
Menu User Tool Setting Requirements
To Next Page
Loading...
Need help?
General
