Copier Features
70
3
❖ Original Type Setting
You can adjust copy finish quality level according to original type. You can
choose these functions after selecting [Original Type 1 (Text)] or [Original Type 2
(Photo)].
•Text Mode 1
normal text originals
•Text Mode 2
newspapers, semi-transparent originals (reverse side print faintly visible)
• Photo Mode 1
text / photo images containing mostly photo areas
• Photo Mode 2
text / photo images containing mostly text areas
• Photo Mode 3
actual photographic paper
• Special Mode 1
highly transparent originals (reverse side clearly visible), or light text on a
coloured background. Also for originals with very grainy backgrounds
(some newspapers) and light text.
• Special Mode 2
originals with coloured text and lines
• Special Mode 3
photo images created by dithering (visible dots), such as newspaper pho-
tos - normal resolution
• Special Mode 4
photo images created by dithering (visible dots), such as newspaper pho-
tos - coarse resolution
•Special mode 5
normal text originals (reproducing the background)
The default setting for Original Type 1 (Text) is Text Mode 1.
The default setting for Original Type 2 (Photo) is Photo Mode 1.
❖ Duplex Mode Priority
You can select the type of Duplex function effective when the machine is
turned on, reset, or modes are cleared.
This function is available for Type 2 only.
The default setting is 1 Sided→1 Sided.
To Next Page
Loading...
Need help?
General
