Copier Features
71
3
❖ Orientation
You can select the original orientation when using the Combine/Series, or
two-sided originals to 1-sided duplex function.
•Type 1
You can select the original orientation when making Combine/Series cop-
ies.
•Type 2
You can select the original orientation when using the Combine/Series, or
two-sided originals to 1-sided Duplex function.
The default setting is Do not Specify.
❖ Max. Number of Sets
The maximum copy quantity can be set between 1 and 99 using number keys.
The default setting is 99 sheets.
❖ Original Count Display
You can set to display the count of originals and copying pages on the display
when [On] is selected.
The default setting is Off.
❖ Reproduction Ratio
You can select which reduce, enlarge, or input ratio is shown on the display
with priority when [Reduce] or [Enlarge] is selected.
Reduce or Enlarge ratios for setting are as follows:
The default setting for Ratio 1 is 50% (Metric version) / 50% (Inch version).
The default setting for Ratio 2 is 71% (Metric version) / 65% (Inch version).
The default setting for Ratio 3 is 82% (Metric version) / 78% (Inch version).
The default setting for Ratio 4 is 93% (Metric version) / 93% (Inch version).
The default setting for Ratio 5 is 122% (Metric version) / 121% (Inch version).
The default setting for Ratio 6 is 141% (Metric version) / 129% (Inch version).
The default setting for Ratio 7 is 200% (Metric version) / 155% (Inch version).
❖ Preset R/E Priority
You can set the ratio with priority when [R/E] is selected.
Using the number keys, enter the ratio from "50-200" in units of 1%.
The default setting is 71% (Metric version) / 65% (Inch version).
❖ Duplex Margin
Specify left margin on the back side of copies, and top margin on the front
side. Select [Top Margin] or [Left Margin], and then set the required value.
This function is available for Type 2 only.
• Top Margin: 0-50mm, 0"-2"
• Left Margin: 0-50mm, 0"-2"
The default setting is 5 mm (Metric version) / 0.2 inch (Inch version).
To Next Page
Loading...
