IP-Fax Settings
79
4
❖ SIP Settings
Set the SIP server's IPv4 address and SIP user name.
To use the SIP server, set the parameter setting list (switch 34, bit 0) to "On".
The default is "Off".
A Select [Fax Features] using {U} or {T}, and then press the {OK} key.
B Select [IP-Fax Settings] using {U} or {T}, and then press the {OK} key.
C Select [SIP Settings] using {U} or {T}, and then press the {OK} key.
D Select [Proxy Server Addr. (Main)] using {U} or {T}, and then press the {OK}
key.
A proxy server relays call requests and responses.
E Enter the IPv4 address of the proxy server, and then press the {OK} key.
F Select [Redirect Svr. Addr. (Main)] using {U} or {T}, and then press the {OK}
key.
A redirect server processes request destination inquiries.
G Enter the IPv4 address of the redirect server, and then press the {OK} key.
H Select [Registrar Address (Main)] using {U} or {T}, and then press the {OK}
key.
A register server registers location information of user agents (which cor-
respond to telephones or facsimiles on public telephone lines) on an IP net-
work.
I Enter the IPv4 address of the register server, and then press the {OK} key.
J Select [SIP User Name] using {U} or {T}, and then press the {OK} key.
K Enter SIP User Name, and then press the {OK} key.
To Next Page
Loading...
Need help?
General
