Specifying E-mail Destinations
17
1
C Press the {U} or {T} key to select the destination from the list, and then
press the {V} key.
The check box on the left side of the selected destination is selected.
Repeat this step to add more destinations.
D Press the {OK} key.
Note
❒ If under [System Settings], [LDAP Search] is set to [On], a screen to select a
search object appears when you press the {Search Destination} key. On the
screen, select [Search Address Book], and then press the {OK} key.
❒ To cancel a selected destination, press the {U} or {T} key to select the tar-
get destination, and then press the {W} key.
❒ Depending on the security settings, some destinations may not appear in
the destination list.
Using a registration number to select a destination
Select the destination from the machine’s address book using its registration
number.
A Press the {Search Destination} key.
The illustration is an example. The actual appearance may be different.
ZZZ610S
To Next Page
Loading...
