SERVICE PROGRAM MODE TABLES
SM 5-67 B064 Series/B140 Series/G126
Service
Tables
5106* Auto Density Level
Selects the image density levels that are used in ADS mode by assigning a
value to the center notch.
[1~7/1 step/notch]
5112* Non-Std. Paper Sel.
Determines whether a non-standard paper size can be input for the universal
cassette trays (Tray 2, Tray 3)
[0~1/1]
0: No
1: Yes. If “1” is selected, the customer will be able to input a non-standard
paper size using the UP mode.
5113* Optional Counter Type
001 Default Optional Counter Type
Selects the type of counter:
0: None
1: Key card (RK3, 4) Japan only
2: Key card down
3: Pre-paid card
4: Coin Rack
5: MF key card
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
002 External Optional Counter Type
Enables the SDK application. This lets you select a number for the external
device for user access control.
Note: “SDK” refers to software on an SD card.
[0~3/1]
0: No external devices.
1: External device 1
2: External device 2
3: External device 3
5118* Disable Copying
Temporarily denies access to the machine. Japan Only
[0~1/1]
0: Release for normal operation
1: Prohibit access to machine
5120* Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0~2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
To Next Page
Loading...
