SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126 5-68 SM
5121* Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or at
paper exit. Japan Only
[0~1/1]
0: Feed count
1: No feed count
5126 F Original Size Selection
Sets the original size that the machine detects for F sizes.
[0~2/1]
0: 8hf x 13
1: 8hf x 13qr
2: 8 x 13
Note: hf = 1/2, qr = 1/4
5127 APS OFF Mode
This SP can be used to switch APS (Auto Paper Select) off when a coin lock or
pre-paid key card device is connected to the machine.
[0~1/1]
0: On
1: Off
5129 F Paper Size Selection
Sets the paper size that the machine detects when the 8 x 13 dial setting on a
paper cassette is used (LT/DLT version).
[0~2/1]
0: 8 x 13
1: 8hf x 13
2: 8qr x 13
Note: hf = 1/2, qr = 1/4
5131* Paper Size Type Selection
Selects the paper size type (for originals and copy paper). (Only needs to be
adjusted if the optional printer controller is installed)
[0~2/1]
0: JP (Japan)
1: NA (North America)
2: EU (Europe)
After changing the value, turn the main power switch off and on.
To Next Page
Loading...
