EasyManua.ls Logo

Ricoh B064 - Page 473

Ricoh B064
1060 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SERVICE PROGRAM MODE TABLES
SM 5-71 B064 Series/B140 Series/G126
Service
Tables
5169 CE Login (B140 only)
If you will change the printer bit switches, you must ‘log in’ to service mode with this
SP before you go into the printer SP mode.
[0~1/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5212* Page Numbering
003 Duplex Printout Left/Right Position
Horizontally positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is left, + is right.
004 Duplex Printout High/Low Position
Vertically positions the page numbers
printed on both sides during duplexing.
[–10~+10/1 mm]
0 is center, minus is down, + is up.
5302* Set Time
Sets the time clock for the local time.
[–1440~1440/1 min.]
5307* Summer Time
Lets you set the machine to adjust its date and time automatically with the change to
Daylight Savings time in the spring and back to normal time in the fall. This SP lets
you set these items:
- Day and time to go forward automatically in April.
- Day and time to go back automatically in October.
- Set the length of time to go forward and back automatically.
The settings for 002 and 003 are done with 8-digit numbers:
Digits Meaning
1st, 2nd Month. 4: April, 10: October (for months 1 to 9, the first digit of 0
cannot be input, so the eight-digit setting for 002 or 003 becomes
a seven-digit setting)
3rd Day of the week. 0: Sunday, 1: Monday
4th
The number of the week for the day selected at the 3rd digit. If
0”
is selected for “Sunday”, for example, and the selected Sunday is
the start of the 2nd week, then input a “2” for this digit.
5th, 6th The time when the change occurs (24-hour as hex code).
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
7th The number of hours to change the time. 1 hour: 1
8th If the time change is not a whole number (1.5 hours for example),
digit 8 should be 3 (30 minutes).
001 Setting Enables/disables the settings for 002 and 003.
[0~1/1]
0: Disable
1: Enable
003 Rule Set (Start) The start of summer time.
004 Rule Set (End) The end of summer time.

Table of Contents

Related product manuals