SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126 5-72 SM
User Code Count Clear 5404*
001 User Code Counter Clear Clears all user code counters.
Press # to execute.
5501* PM Alarm
Sets the count level for the PM alarm.
[0~9999/1]
0: Alarm disabled
The PM alarm goes off when the print count reaches this value multiplied by
1,000.
5504* Jam Alarm
5505* Error Alarm
Japan Only
5507 Supply Alarm Japan Only (B064 only)
001 Paper Supply Alarm
002 Staple Supply Alarm
003 Toner Supply Alarm
Enables or disables the call function. Japan Only
[0~1/1]
0: No call
1: Call
If this SP is enabled, use the settings below to set the
supply level to initiate a call for each paper size.
128* Interval: Other
132* Interval: A3
Sets the level to initiate a paper supply call for each
paper size, if SP5507-001 is enabled. Japan Only
[00250~10,000/1]
133* Interval: A4
134* Interval: A4
141* Interval: B4
142* Interval: B5
160* Interval: DLT
164* Interval: LG
166* Interval: LT
172* Interval HLT
To Next Page
Loading...
