SERVICE PROGRAM MODE TABLES
SM 5-75 B064 Series/B140 Series/G126
Service
Tables
5801 Memory Clear
Clears all data from NVRAM. Before executing this SP, print an SMC Report.
( 5.2.1)
001 All Clear Initializes items 2 ~ 15 below.
002 Engine Clear Initializes all registration settings for the
engine and copy process settings.
003 SCS Initializes default system settings, SCS
(System Control Service) settings, operation
display coordinates, and ROM update
information.
004 IMH Memory Clear Initializes the image file system.
(IMH: Image Memory Handler)
005 MCS Initializes the automatic delete time setting
for stored documents.
(MCS: Memory Control Service)
006 Copier application Initializes all copier application settings.
007 Fax application Not used.
008 Printer application Initializes the printer defaults, programs
registered, the printer SP bit switches, and
the printer CSS counter.
009 Scanner application Initializes the defaults for the scanner and
all the scanner SP modes.
010 Web Service/ Network application Deletes the Netfile (NFA) management files
and thumbnails, and initializes the Job login
ID.
Netfiles: Jobs to be printed from the
document server using a PC and the
DeskTopBinder software
011 NCS Initializes the system defaults and interface
settings (IP addresses also), the
SmartNetMonitor for Admin settings,
WebStatusMonitor settings, and the
TELNET settings.
(NCS: Network Control Service)
014 Clear DCS Setting Initializes the DCS (Delivery Control
Service) settings.
015
Clear UCS Setting
Initializes the UCS (User Information
Control Service) settings.
016
MIRS Setting
Initializes the MIRS (Machine Information
Report Service) settings. (B140 only)
017
CCS
Initializes the CCS (Certification and
Charge-control Service
) settings. (B140
only)
5802* Printer Free Run
Makes a base engine free run
[0~1/1]
0: Disable: Release free run mode
1: Enable: Enable free run mode
Return this setting to off (0) after testing is completed.
To Next Page
Loading...
