SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126 5-76 SM
5803 Input Check
Displays signals received from sensors and switches. ( 5.7.1)
5804 Output Check
Turns on the electrical components individually for testing. ( 5.7.2 )
5807 Option Connection Check
001 ADF (1:Connect)
002 Bank (1:Connect)
003 LCT (1:Connect)
004 Finisher (1:Connect)
Displays a 1 or 0 to indicate the status of the
device.:
[0~1/1]
1: Connected
0: Not connected
5811* Machine No. Setting Enters the machine serial number. DFU
5812* Service Tel. No. Setting
001 Service
Inputs the telephone number of the CE (displayed when a
service call condition occurs.)
002 Facsimile
Use this to input the fax number of the CE printed on the
Counter Report (UP mode). Not Used
003 Supply Displayed on the initial SP screen.
004 Operation
Allows the service center contact telephone number to be
displayed on the initial screen.
To Next Page
Loading...
