SERVICE PROGRAM MODE TABLES
SM 5-79 B064 Series/B140 Series/G126
Service
Tables
5828 Network Setting
012 Device Name (B064 only)
Use these SPs to perform the network settings.
075 DNS Server From DHCP (B064 only)
076 DNS Server 1
077 DNS Server 2
078 DNS Server 3
079 Domain Name (Ethernet)
050
1284 Compatibility
(Centro)
Enables and disables bi-directional communication
on the parallel connection between the machine and
a computer.
[0~1/1]
0:Off
1: On
051 Data Transfer (Centro)
Determines the speed of data transmission on the
parallel line connection between the machine and a
computer.
[0~1/1]
0: Slow
1: Fast
With the “Slow” setting, there is a 120-microsecond
interval from the time an STB signal is sent until the
data is moved.
052 ECP (Centro)
Disables and enables the ECP feature (1284 Mode)
for data transfer.
[0~1/1]
0: Disabled
1: Enabled
065 Job Spooling
066 Job Spooling Clear: Start Time
069 Job Spooling (Protocol)
084
Print Settings List
Prints a list of the NCS parameter settings.
090
TELNET (0:OFF 1:ON)
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
[0~1/1]
0: Disable
1: Enable
091
Web (0:OFF 1:ON)
Disables or enables the Web operation.
[0~1/1]
0: Disable
1: Enable
5831 Initial Setting Clear
Press Execute to initialize all User Tool settings and restore them to their factory
settings.
To Next Page
Loading...
