SERVICE PROGRAM MODE TABLES
B064 Series/B140 Series/G126 5-84 SM
013 Login MAX
Sets the maximum number of logins from the initiator (6-bits)
[0~63/1]
0: Reserved
63: Reserved
5840* IEEE 802.11b (B064 only)
006 Channel MAX
Sets the maximum range of the bandwidth for the wireless LAN. This bandwidth
setting varies for different countries.
[1~14/1]
007 Channel MIN
Sets the minimum range of the bandwidth for operation of the wireless LAN. This
bandwidth setting varies for different countries.
[1~14/1]
011 WEP Key Select
Determines how the initiator (SBP-2) handles subsequent login requests.
[0~1/1]
0: If the initiator receives another login request while logging in, the request is
refused.
1: If the initiator receives another login request while logging in, the request is
refused and the initiator logs out.
Displayed only when the wireless LAN card is installed.
5841* Supply Name Setting
Press the User Tools key. These names appear when the user presses the
Inquiry button on the User Tools screen.
001 Toner Name Setting: Black Enter the name of the toner in use.
011 StapleStd1
012 StapleStd2
013 StapleStd3
014 StapleStd4
Standard Staples
021 StapleBind1
022 StapleBind2
023 StapleBind3
Saddle-Stitch Staples
5842* 001 Net File Analysis Mode Setting Bit SW 0011 1111
To Next Page
Loading...
